Facts About Termite Control Process Uncovered

Getting My Termite Control Procedure To Work


Mud tubesUnlike ants, termites do not ramble around on the ground surface or outside in the open. They will either tunnel through the soil or into wood (or other material) or else travel inside pencil-size (or bigger )"mud tubes" they assemble from soil, wood contaminants and other materials. You will find these tubes on foundation walls, floor joists or other areas of the house.

Fascination About Termite Control ProductsTermite Control Process Fundamentals Explained
Split open the tubes to determine if termites continue to be active. An empty tube doesn't necessarily mean that termites are gonethey may have simply abandoned this specific tunnel. Termites often rebuild damaged tubes, and it can be another indication of current action. 'Old' tubes are dry and crumble easily, leaving behind"etching" on the surface which may be visible for decades (an indication that a house had termite activity at any time).

Tubes which are found on ceilings or on top levels of a building may indicate that you have an aboveground ("aerial") infestation, i.e., the termite colony actually lives in the building and the termites are traveling from the ground. Mud tubes built by an aboveground colony normally contain substances other than soil, e.g., wood and sheet rock or anything the termites are feeding on.

The Only Guide for Termite Control ProcessThe Of Termite Control Process

Our Termite Control Process Diaries


In such situations, a thorough inspection may necessitate removal of siding or interior wallboards, etc.. More importantly for you, these aboveground infestations cannot be controlled using the usual soil treatment (see below) and therefore are generally deducted by a termite contract warranty. In these situations, finding and correcting the moisture problem is the very first step to eliminating the termites. .

We tend to think about termites as feeding/injuring wood only. Termites really feed on almost anything which contains cellulose, the main component of wood, including wood paneling, paper products, cardboard boxes, art canvases, the newspaper covering of sheet rock, carpeting, etc.. While foraging and feeding, they may tunnel through non-cellulosic substances, such as plastic and foamboard.

What Does Termite Control Process Mean?


In fact, the amount of harm that termites cause depends on many factors. In regions with cold winter temperatures, termite activity (and feeding) often declines, but does not necessarily stop. When the termites are well-protected from colder temperatures (e.g., underneath a slab), then activity might continue year-round. From a practical standpoint, severe termite damage usually takes approximately 3-8 decades. .

There is no accurate method for determining the age of recently discovered damage. You need some reference point, i.e., some point in time when it was known there was no damage to this specific wood. This is one reason why annual inspections (and keeping your records of those inspections) are important. .

NOTE: These inspections are not a guarantee that you do not have termites or damage in areas which are not covered or not readily seen, such as inside walls. On the other hand, the inspections can reveal conditions that may imply that damage does exist and additional investigation is try this needed.

In case you've got a termite protection contract, contact the pest control company quickly and arrange for them to take a look at the issue. Should you not have a termite contract, call 2-3 (or more) companies and have every one inspect your home and offer you the details of their findings and any recommendations for a plan of action to correct any termite conditions they found.

All about Termite Control Procedure


Termites do not cause significant damage in a short time period, so spending a couple of added days or even a few weeks will not make any real difference in terms how much damage occurs. .

Is there harm That Needs to Be repaired or examined by a contractor or engineer before control measures are done

Simply spraying swarmers or the surface of accessible infested wood may kill the termites which you see now, but it does not block the infestation nor does it protect your house from potential attacks . The most common type of termite treatment involves a"trench and cure" in which a liquid insecticide ("termiticide") is applied to the soil surrounding critical areas of your house.

What Does Termite Control Procedure Do?


The dirt is trenched 6" deep and approximately 4-6" wide. For houses with crawlspaces, the soil along the interior foundation wall has to be treated within 4 feet of identified signs of termite activity. In some circumstances, the soil around supports (for example, piers) underneath the home can also be treated.

When applied correctly, this treatment forms a continuous chemical barrier that should prevent termites from reaching the foundation and piers in your house. .

Concrete slabs that attach to the home, for instance, a garage floor, or the slab of an earth-filled porch.

Leave a Reply

Your email address will not be published. Required fields are marked *